Pointe Shoe Shellac
Pointe Shoe Shellac
Instructions as given by Supplier:
- Shake before use
- Make sure there is nothing inside your pointe shoes (no toe pads, drawstrings, lambswool etc.)
- Apply Pointe Shoe Shellac evenly INSIDE the TOE BOX and INSIDE the TIP of the shoe. If you put Pointe Shoe Shellac on the outside of the shoe it will stain the satin.
- NOTE: If there is a sponge padding, it is not recommended to shellac the sponge or it will harden
- Apply Pointe Shoe Shellac to the SHANK on the inside or outside of the shoe only if you need more support for your arch or ball of foot
- Pointe Shoe Shellac is not recommended for the wings of the Pointe Shoe
- If harder shoes are desired, after first application, let shellac dry and then apply a 2nd coat of shellac. Repeat if necessary. 1 coat for less hardness and up to 3 coats for very hard
- Check that the inside of the shoe is completely dry before wearing.
WARNING: Flammable liquid and vapor. Contains Ethanol Keep away from heat, sparks, and flame. May cause eye irritation. In case of eye contact, flush eyes with water for at least fifteen minutes and get medical attention. Causes skin irritation. Avoid contact with skin and clothing. Wash thoroughly after handling. May cause respiratory irritation.
Do not breathe vapors or spray mist. Ensure good cross ventilation during application and drying. If you experience difficulty breathing, eye watering, headache, or dizziness, increase fresh air, wear an appropriate, properly fitted (NIOSH aproved) respirator, or leave the area to obtain fresh air. Do not take internally. If swallowed, do not induce vomitting. Contact a physician or poison control center immediately. Keep container closed when not in use.
KEEP OUT OF REACH OF CHILDREN.
Ingredients: Ethanol, Isopropanol, Methyl Isobutyl Ketone, Pure Shellac, Water.